You may be a little unfamiliar with the high-frequency welding machine . Its function is very large. The high-frequency welding machine is not a single welding machine that uses the principle of electromagnetic induction heating to quickly and cleanly weld. Here is a brief
introduction-the common problems and uses of its high-frequency welding machine .
Common problems of high frequency welding machines and their causes and solutions:
1. The high-frequency welding machine has weak welding, desoldering, and cold folding. The reason may be that the output power and pressure are too small.
Solution:
1. Adjust the power.
2. The thick tube blank changes the shape of the groove.
3. Adjust the extrusion force.
2. There are ripples on both sides of the weld, and the reason may be that the angle of convergence is too large.
Solution:
1. Adjust the position of the guide roller.
2. Adjust the real bending section.
3. Increase the welding speed.
3. There are deep pits and pinholes in the weld, which may be caused by overburning.
Solution:
1. Adjust the position of the guide roller and increase the closing angle.
2. Adjust the power.
3. Increase the welding speed.
4. The external crack of the weld may be caused by the poor quality of the base material and too much extrusion force.
Solution:
1. Guarantee material.
2. Adjust the extrusion force.
He Shun (Shenzhen) Machinery Equipment Co., Ltd.
Contact: Mr. Yang
Mobile phone: 13600429568
Mailbox: hs@hsszjx.com
Website: www.hsszjx.com
Address: 3D, Building 4, No. 12, Jiangshi First Industrial Zone, Jiangwei Community, Matian Street, Guangming District, Shenzhen
微信二维码 手机官网