How to choose a high frequency welding machine?

 There are many common troubleshooting methods for high-frequency equipment . For example, the most common is high-frequency sparking. Then you can blow it clean with an air gun, lower the high-frequency frequency, and keep the high-frequency pressure products clean. Here is how to deal with high-frequency common faults:

The plastic products extruded by the high frequency equipment are not ideal, the solution:

 1. If the high-frequency output is too large or too small, adjust the co-tuner, repeat the test, and adjust to a qualified parameter.

2. If the welding time of high frequency equipment is too long or too short, the welding time should be relatively adjusted or lengthened according to different materials.

3. The high-frequency tube is aging, so test it with a new tube.

How to choose high frequency welding machine

      Many customers have many questions about the purchase of high-frequency fusion splicers, such as the price, quality, and after-sales service of the high-frequency fusion splicer. Now I will tell you how to choose a high-frequency fusion splicer with a cost-effective price ratio. Choose a high-frequency welding machine because it is used for production, so quality is very important. If you want to choose a high-frequency welding machine with good quality, then the configuration of its high-frequency machine is particularly important. It is as large as an electronic tube and as small as an insulating column. The main accessories of the high-frequency welding machine produced by our machinery are: electronic tubes, transformers, contactors, cooling fans, travel switches, time systems, relays, spark protection tubes and other main accessories materials. These high-frequency accessories are used by different manufacturers and their prices vary greatly.