How to quickly and effectively adjust the frame of the ultrasonic welding machine?

     Now, there are many high-tech products in people's production and life. These high-tech products are used in all walks of life according to their own characteristics, bringing great convenience to people's lives, and greatly promoting the development of science and technology in China. Ultrasonic welding machine has been widely used in welding industry, so do we know how to adjust the frame of ultrasonic welding machine when using ultrasonic welding machine?

Height method of ultrasonic welding machine frame:

      1. Lift the screw for adjusting the descending stroke backward by 1 to 2 mm, and use the nut to fix the screw.

 2. Place the ultrasonic bottom mold on the workbench under the frame of the ultrasonic welding machine, and loosen the handle that determines the frame;

      3. Press the ultrasonic mold drop switch once to the self-locking position;

      4. Adjust the height of the hand wheel of the shaker to make ultrasonic molds and plastic parts. The top surfaces of the ultrasonic welding machine are common to each other, the frame is determined, and the bottom mold is fixed with a clamping plate.

      5. Adjust the air pressure to a position greater than 1.5kg;

      6. Press the drop switch of the ultrasonic welding machine again to cancel the self-locking position. At this moment, the ultrasonic mold recovered to the suspended condition.