High frequency automobile sun visor welding machine

Product name: HS-8KW-20T high frequency automobile sun visor welding machine

1. Product features:

1. Adopt European standard square high frequency oscillation box design, excellent and reasonable oscillation loop system, so that high frequency output is stable and output is greater.

2. The introduction of Taiwanese technology, beautiful appearance, reasonable design, novel structure, reliable performance and strong practicability.

3. The high-sensitivity spark protector reduces the damage to the mold during ignition and greatly reduces the loss rate of the product.

4. Over-current protection circuit to avoid overloading of the tube and prolong the service life of the tube.

5. Use advanced high-cycle shielding technology to ensure no high-cycle leakage.

6. The machine can be designed according to the needs of the product to quickly complete the welding of the product.

7. The welding is firm and stable, and the thickness of the material can be satisfied.

8. High frequency current automatic compensation function.

9. Configure the safety grating system.

2. Product application:

High-frequency automotive sun visor welding machine is suitable for welding of PVC, TPU, EVA or mixed plastic materials containing 10% PVC. It is often used for welding of automotive interior sun visors.

The car sun visor mainly adopts a process of heat-synthesizing PVC leather materials through high frequency machines and high frequency equipment after injection foam molding . It has the characteristics of small welding lines and no burrs.

Third, the principle of high frequency welding heat sealing:

The working principle of the high-frequency automobile sun visor welding machine: the dielectric material (PVC film) activates the positive molecules under the action of high-frequency electromagnetic, so that the positive molecules of the dielectric material move at a high speed, and the friction generates heat, which is achieved under the pressure of the mold. The purpose of welding.

The high-frequency automotive sun visor welding machine adopts the principle of high-frequency, and can be used to make high-frequency PVC, TPU, EVA or mixed plastic materials containing 10% PVC. It can be used for welding of automotive interior sun visors.

And other products, high-frequency PVC cloth welding or high-frequency welding or splicing of any soft plastic plastic containing PVC components. After the action of high frequency waves, the surface of the materials welded by high frequency is smooth and flat, beautiful and firm.

Fourth, the instructions for welding the car sun visor:

1. Before starting up, turn on the power switch of the device to warm up 15 minutes in advance.

2. Detect and set various parameter values.

3. Turn on the high-voltage switch and move the down button to check whether the mold is flat.

4. Warm up for 5 minutes after high frequency start.

5. Adjust the high frequency output regulator to the minimum.

6. Turn off the cutting pressure, turn on the high-voltage switch, and the double-head button starts the high-voltage to check whether the current is normal.

7. Put the soft leather that has been baked in the oven into the sun visor mold, then put the injection foam board, and then put a layer of leather.

8. Start the high-pressure button, and the welding process of the welder is automatically completed.

9. When the time is up, the machine head will automatically rise and take out the sun visor product.

Five, machine parameters:

(All specifications related to the machine can be customized according to customer requirements. Due to the need for improvement, there will be no notice for specification changes)

Six, equipment application cases: