Let's explain the operation method of the high frequency machine together .
1. Turn on the three-phase main power switch first, then turn on the power switch on the control box on the machine side. If there is a high cycle switch, do not turn it on temporarily, then turn on the electric heating power switch. At this time, both the vacuum tube and the hot mold begin to warm up.
2. Install the upper mold on the upper end of the lower mold with insulators, press the test switch to start adjusting the joint position of the upper and lower molds, if the lower mold is not well joined, move the lower mold, if the level is not appropriate, adjust the upper mold Four pillars.
3. After adjusting the mold of the high-frequency machine, adjust the three time controllers (if it is a pedal machine, only the high-cycle welding time), the fall time is the time for the upper mold to press the lower mold, and the welding time is the output time, cooling time, The curing time, the above 3 times need to be applied flexibly, and there is no fixed value.
4. When adjusting the mold of the high-frequency machine at one time, the adjustment interval must be adjusted to a wider position.
5. When the above operation exceeds 10-15 minutes and the temperature reaches the required level, turn on the high cycle switch and start the operation test.
6. During the test, if the effect is not satisfactory, please slowly add the same regulator and injection screen flow meter (different models have different meter values, please refer to the manual). Check the product. If it is not ideal, add or reduce the same regulator before meeting the requirements.
7. The effect of the product is determined by the following four aspects
1. Temperature
2. Coherent power output
3. Stress
4. Output high cycle time.
Please adjust flexibly in the above four aspects.
So today's explanation is here first, I believe everyone also has a certain understanding of the operation method of the high frequency machine. Thank you very much for your patience.
He Shun (Shenzhen) Machinery Equipment Co., Ltd.
Contact: Mr. Yang
Mobile phone: 13600429568
Mailbox: hs@hsszjx.com
Website: www.hsszjx.com
Address: 3D, Building 4, No. 12, Jiangshi First Industrial Zone, Jiangwei Community, Matian Street, Guangming District, Shenzhen
微信二维码 手机官网